Engineer Team Leader

Setup Loop Details including Area, Plant, Location, Manufacturer, Service Status, Company, Department & Serial Number. Setup a completely New Loop or setup a new Loop by copying details from an existing Loop.

Engineer Team Leader

Setup Loop Component Details including Tag, Description, Serial Number, Manufacturer, Range and Tolerance.

Engineer Team Leader

Setup Loop Switch Details including Tag, Description, Serial Number, Manufacturer, Range, Tolerance, Setting & Alarm.

Engineer Team Leader

Setup Loop Routine Details and Calibration Values including Interval, Priority, Criticality, Work Sheet Type, SOPs, Tasks, Components, Input/Output Ranges & Tolerance values.

Calibration Technician

Carry out the work and fill in calibration results. Colour coding for easy recognition of failures, e.g. yellow for re-adjustment (precentage of process tolerance) and red for deviations when errors exceed the process tolerance values. Calibration results may be displayed immediately in graphical form for checking.
Check the Component Used box to enable entering of calibration data for that component. Calibrate up to a maximum of 4 components in any one WorkOrder.

Calibration Technician

Enter Loop Switch Point data for each Switch Point attached to the Work Order.

Calibration Technician

If Calibration Data entered create errors that exceed the process tolerance for the Loop, then user must fill out the Deviation Cause and Action Required field before saving the entered data. Deviation will be created and email will be sent to Loop’s Company email with Deviation and WorkOrder reports attached.